|
|
Possibility of using EMW radiation for killing biotic pests
Gintar, Jan ; Klečka,, Tomáš (referee) ; Pěnčík, Jan (referee) ; Šuhajda, Karel (advisor)
The remediation of building elements and structures in terms of moisture and sterilization (inactivation) of biotic pests is dealt with quite often in construction practice and in the construction industry itself, and is thus a topical issue. The issue is dealt with by specialized companies that know the use of available technology on the market, or are themselves involved in the development and improvement of these devices. Several methods are known for the removal of moisture and sterilization of biotic pests, with sufficiently high-quality data on the technology used, the suitability of the equipment used, a more detailed description of the application of the methods themselves and the results themselves. The methods themselves, for removing moisture and eliminating (inactivating) biotic pests, must be chosen according to individual requirements, as some methods will be more appropriate (more effective) and some less suitable. For the practice itself, however, it is important that the methods are sufficiently effective and at the same time available to the wider public (their economic side). In my dissertation thesis I focus on the potential of EMW radiation utilization not only for liquidation of biotic pests (fungi, fungi, wood decaying insects), but also elimination or reduction of necessary conditions for survival or development of these biotic pests. Therefore, my work also focuses on the presence of moisture, because moisture is a common factor in the vast majority of problems associated with the occurrence of biotic pests. Due to its intensity, it is one of the less time-consuming method and therefore a more cost-effective (economically) method. The research I conducted at VUT FAST focused on the use of microwave radiation in the control of biotic pests, under conditions that are close to those on real constructions. The use of a microwave method to eliminate biotic pests and at the same time to remove moisture has proved to be advantageous.
|
|
|
Antenna for mobile high power microwave generator
Kračmar, Leoš ; Láčík, Jaroslav (referee) ; Mikulášek, Tomáš (advisor)
The bachelor thesis deals with the design and practical implementation of a magnetron connected to waveguide as an excitation source for a linear slot antenna array. The goal was thorough acquaintance with the issue of partial parts of designs, verification of calculated parameters using software simulations and practical measurements on manufactured parts of the project. In the first part of the work, it theoretically deals with used components, used parameters and by software design of a magnetron to waveguide transition model with practical measurement. The second part of the work contains calculations and simulations of the design of a linear slot antenna array, which continues by series of practical measurements of antenna properties.
|
|
|
Photoimpedace spectroscopy characterization of optical and electrical properties of the photovoltaic cells
Mocharová, Zuzana ; Chladil, Ladislav (referee) ; Novák, Vítězslav (advisor)
Diploma thesis mainly describes the theoretical knowledge of the topic photoimpedance spectroscopy characterization of optical and electrical properties of the photovoltaic cells, which contains development and princip of cells working, material properties of photovoltaic cells, explanation of electromagnetic waves, spectrophotometry and impedance spectroscopy, followed by a discription of the measuring device and used measuring methods. The experimental section for each measurement method describes the steps of setting the program, then the tables with measured values are involeved in some parts and a part of each method are summary graphs of measured values with subsequent evaluation.
|
|
|
Organic semiconductors properties
Kočer, Martin ; Vaněk, Jiří (referee) ; Špinka, Jiří (advisor)
This diploma thesis deals with optical properties of organic semiconductors and measuring method of absorption edge. Project is focused on absorption of light in organic semiconductors. This work also describes device for measuring of absorption edge.
|
|
|
Monocrystalic silicon - optical properties
Kahánek, Tomáš ; Vaněk, Jiří (referee) ; Špinka, Jiří (advisor)
This diploma thesis deals with optical properties of silicon. The main task of the work was to create silicon samples with ohmic contacts. Suitable radiation source was designed to measure absorption edge of monocrystalline silicon. Designed measuring station was realised. Measurements were performed on samples of p-type monocrystalline silicon provided by ON Semiconductor Rožnov. p. Radhoštěm. The absorbtion edge was measured.
|
|
|
Disposal of Biotic Pests by EMW Radiation
Sobotka, Jindřich ; Klečka,, Tomáš (referee) ; Myslín, Jiří (referee) ; Tomíček,, Oldřich (referee) ; Šuhajda, Karel (advisor)
The possibility of using high-frequency electromagnetic radiation in the construction sector is a common knowledge. Various experiments have been carried out to dry construction materials, or even to destroy biotic pests. However, the majority of these experiments have been executed in laboratory conditions. It means they have been carried out under exact limiting conditions, often very far off those conditions in real building practice. Therefore, this dissertation aims at exploring the possibility of utilizing microwave technology in drying and heating of construction materials, in disposing of biotic pests and sterilizing building materials under real conditions in building practice. The thesis will explain that microwaves are a term given to a part of electromagnetic radiation. Electromagnetic radiation is based on the principle that the radiated energy is absorbed by water molecules present in moist building material. In the mass of the irradiated material, the radiated energy is transformed into thermal energy, where a so-called “motion” of water molecules occurs with the energy then being transformed into kinetic energy. The microwave technology itself offers a very wide range of use, which can be easily achieved, thus making the technology available to use in the future. Part of the experiments and the necessary measurements, too, has been carried out on selected types of building materials in the premises of the Faculty of Civil Engineering of Brno University of Technology. They have been executed under conditions which most closely correspond to the conditions in real buildings. Part of the experiments and the necessary measurements were carried out on particular constructions, by the so-called in situ method. As stated in the conclusion of the dissertation, laboratory measurements and the in situ measurements differ considerably in some cases.
|
|
|
Parameters of FTTx networks - Quality of services
Winkler, Aleš ; Reichert, Pavel (referee) ; Münster, Petr (advisor)
The main subject of this diploma thesis is to make a proposal to improve the optical access network for the transmission of Triple play services. I would here to the reader clarify method of proposal of optical network. There are described the kinds of optical access networks with parameters, for which we must look by their construction. There are described the modern methods of construction optical network too. In the theoretical part are discussed used architecture of networks too. I met here known standards, which I compared for big importance by their choice. A reason of construction of optical network are services known like Triple play. These services together with their problems and parameters are here discussed too. At the end of theoretical part I listed here measuring method for getting negative attribute distorting the led signal. In practical part the locality witch use the optical signal as the source of information is ordered. These network use unfit connections and has less possibilities than usual and this is the reason, why is the network not able to supply Triple play in requested quality. At first the analysis of ordered network was needed. Situation was complicated by the fact, that it has been prohibited entrance to me. The structure of network and network parts was known and documented by me. I made the proposals to improve this network in practical part. By the first proposal remained original kind of access network FTTB, but used new parts with higher performance. By the second proposal I made the network FTTH, by which it was possible to use the last haul optical cables with treatment and using new elements. It was needed to create solution by flat units. The resulting proposals are here evaluated, compared and cost evaluated. For rejection of access to optical network I did not make measuring, so I made simulation for variant FTTH for getting some parameters negative acting transmission.
|
|
|
Diffraction on Spatial and/or Deep Objects
Hrabec, Aleš ; Petráček, Jiří (referee) ; Kotačka, Libor (advisor)
This discourse deals with a theoretical study of the radiation passage through a diffraction screen with non-zero size in the propagation direction of the radiation, i.e. the radiation passage through a three-dimensional object. Without any loss of generality, we solve the problem for cylindrical cavity in metal. The task exceeds evidently standard scalar theory of diffraction, thus we solve the problem using a waveguiding theory. Following the principles of the electromagnetic theory, we derive required formulae to determine mode distribution at the entry of the cavity. Further, we solve numerically the radiation propagation through the cavity, then we actually seek for radiation distribution at the very end of the cavity. This yields, with a help of the discrete Fourier transform, an intensity distribution of Fraunhofer diffraction pattern, consequently compared with an intesity distribution of the radiation pattern of Fraunhofer diffraction on infinitely thin circular opening having the radius of the cylinder cavity under study. A comparison of such patterns results to a conclusion, that the cavity length has a significatn influence on the diffraction pattern and more importantly, that the scalar diffraction theory appears incorrect for a coherent light passage through cavities longer than their radius squared. Similarly, the same conclusion is inversely proportional to a wavelength of the interacting radiation. Finally, we mention an existence of the so called "focal regime", when the radiation repeatedly exhibits roughly one order increased intensity on the symmetry axis of the cavity.
|
|
|
Spectral properties of daylight as time-spatial function
Mayer, Jan ; Drápela, Jiří (referee) ; Baxant, Petr (advisor)
Graduation thesis describes basic data about Sun, suns constant, solar radiation thoroughfare by the earth's atmosphere. Thesis describes effects of components of optical radiation and physical character of solar radiation. Thesis also describes character of day lighting in nature, spectral distribution of natural lighting, average time of sunshine. The next point of thesis is description of measuring equipment Konica Minolta. In chapter measuring procedure is described measuring process of the sky radiance. Measurement analysis is mentioned in conclusion.
|
|
|
Centre-fed microstrip patch antenna
Jireček, Martin ; Láčík, Jaroslav (referee) ; Raida, Zbyněk (advisor)
Systems with extreme bandwidth are part of advanced modern systems at radio high capacitive communication. Originally this technology was intended for radar scan. Thanks to wide frequency band had radar possibility „ see" a behind crimp, e.g. behind woody partitions etc . To his noise immunity, fail safe tapping plus small wattage heftiness began use for datal systŽm function. If is elementary antenna compound from coaxial probe and shorting outlet, it is possible use to actuating separate narrow slot placed in the middle of incandescent dabs. Impedance and radiating characteristics conventionally plumbed phlobaphene antennae excited tape lead and suggested microstrip phlobaphene antennae are experimentally explored plus collated. Explored is so and effect changes slotted longitude slot on characteristics elementary antenna.
|
guest ::
